Removal Of The 1St Image Transfer Pressure/Retraction Motor - Minolta CF1501 Service Manual

Precaution for Reinstallation
• When reinstalling the harness holder,
make sure that the protrusion on the
backside of the holder fits into the
hole in the metal bracket.

(14) Removal of the 1st Image Transfer Pressure/Retraction Motor

1. Remove the MSC/PIC Board Box.
D-41 (steps 1 through 8)
2. Unplug three connectors and remove two termi-
nals.
3. Remove six screws and High Voltage Unit 2.
4004D066AA
4. Unplug one connector.
5. Remove three screws and the Fusing Cooling
Fan Motor 2 Unit.
4004D067AB
6. Remove four screws and, sliding the board
holder to the left, take it off.
4004D068AA
7. Unplug one connector.
8. Remove two screws and the 1st Image Transfer
Pressure/Retraction Motor.
4004D069AA
D-45
4004D065AB