(4) Adjustment of Manual Feed Paper Take-Up Solenoid SL4
1134D119AA
1134D120AA
4.
Slowly move the SL4 in the direction opposite that in step 3. When the two Stoppers just swing into
the upright position, tighten the two SL4 mounting screws.
1.
Remove the SL4 mounting bracket. (For the removal
steps, see p. D-25.)
2.
Manually bring SL4 into the energized position (plunger
pushed in).
* A click is heard when the solenoid is energized.
Then, hold the plunger in position.
3.
Loosen two screws that secure the SL4 and slide SL4 all
the way in the direction of the arrow.
D-98
1134D121AA