Pwb-T (Tech. Rep. Setting Switches Board; Clearing Procedures - Minolta CF1501 Service Manual

2-3.

PWB-T (Tech. Rep. Setting Switches Board)

Symbol Name
SW1 Trouble Reset Switch
(1)

Clearing Procedures

Initialize
1. Turn ON the Power Switch.
2. With the circuit across pins of PJ2 closed, turn OFF then ON the Power Switch.
3. Open the circuit in about 5 seconds.
4. Check that the message "Initialize Completed" is displayed on the Touch Panel and
then touch the "Enter" key.
Memory Clear
1. Turn ON the Power Switch.
2. With the circuit across TP1 and TP3 closed, turn OFF then ON the Power Switch.
3. Open the circuit in about 5 seconds.
4. Check that the message "Memory Clear Completed" is displayed on the Touch Panel
and then touch the "Enter" key.
NOTES
• If the copier exhibits an erratic display or operation, reset and clear in the following order:
Initialize ¡ Memory Clear.
• If Memory Clear has been performed, make settings of various functions once again.
Description
Resets the malfunction display.
S-7
4004S003AB