Removing A Processor Power Module; Installing A Memory Upgrade On The Video Board - Compaq ProLiant 800 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Removing a Processor Power Module

Reverse the procedures in the "Installing a Processor Power Module" section.
Figure 3-13.
Installing a Memory Upgrade
on the Video Board
To install an additional 1-MB DRAM upgrade module on the PCI graphics
board:
1. Turn off the server, disconnect the power cord from the electrical
outlet and remove the side access panel.
Removing a Processor Power module
Writer: Project: Installing Hardware Options Comments:
File Name: E-ch3.doc Last Saved On: 4/23/97 11:22 AM
Compaq ProLiant 800 Server Reference Guide
3-17