Compaq ProLiant 800 Manual page 105

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-14 Using the System Configuration Utility
2. If you are running IntranetWare, Compaq recommends that you use
LAN adapter drivers that have been upgraded to the latest Novell
specification (ODI 3.3 compliant). These drivers can be found on the
NPFC Supplement diskette, version 3.05 or newer. The LAN adapter
drivers are located in the \NETWORK sub-directory. For example, if
you want to load the driver for the Compaq NetFlex-3 family of
adapters, then from the NetWare console you would type:
LOAD A:\NETWORK\CPQNF3.LAN
Please read NET_SRVR.RDM from the NPFC diskettes for further
information.
3. Your ProLiant 800 server comes with one IDE channel to which you
can attach IDE devices. For each IDE channel to which you have an
attached device, you must load the following drivers found on the
NPFC diskette according to the type of device attached:
Please read STORAGE.RDM from the NPFC diskettes for further
information.
4. If your server has more than 16 MB of system memory (RAM)
installed, then you must apply a loader patch provided by Novell. If
you are running NetWare 3.12, the loader patch can be found in the
312PT9.EXE (or newer) file. If you are running NetWare 4.10, the
loader patch can be found in the 410PT6.EXE (or newer) file.
IntranetWare does not require a patch. The 312PT9.EXE and
410PT6.EXE files are available from Novell through NetWire or
their support web site (http://support.novell.com)
You can also obtain the 312PT9.EXE patch off the Compaq SmartStart
NetWare CD No. 3 under: \PATCHES\NW312
Writer: Project: Using the System Configuration Utility Comments:
LOAD A:\IDE\IDEATA.HAM for each IDE channel
LOAD A:\IDE\IDEHD.CDM for an IDE fixed disk
LOAD A:\IDE\IDECD.CDM for an IDE CD-ROM drive
File Name: F-ch4.doc Last Saved On: 4/24/97 9:54 AM