. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-9.
Follow these steps to install a Processor Power module:
1. Align the key slot in the bottom edge of the Processor Power module
with the tab in the expansion slot. The module will not seat if turned
the wrong way.
2. Insert the module straight down into a socket on the memory board.
3. As the module goes into the socket, the socket latches spread open.
4. Use your thumbs to press firmly down on the module, while at the
same time pushing the latches inward with your index fingers until the
latches snap into place.
Installing a Processor Power module
Writer: Project: Installing Hardware Options Comments:
File Name: E-ch3.doc Last Saved On: 4/23/97 11:22 AM
Compaq ProLiant 800 Server Reference Guide
3-13