Installing A Second Processor; Installing The Processor - Compaq ProLiant 800 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installing a Second Processor

To install a second processor:
1. Remove the side access panel.
2. Remove the expansion backplane brace as described in the section
"Removing the Expansion Backplane Brace."
3. Install the new processor.
The installation steps are described below.

Installing the Processor

1. Remove the side access panel.
2. Remove the expansion backplane brace as described in the section
"Removing the Expansion Backplane Brace."
3. Align the new processor with the ZIF socket.
4. Install the thermal pad first, then install the processor by lowering it into
the ZIF socket.
CAUTION:
Installing the processor upgrade incorrectly may cause
damage to the processor board. Compaq recommends that you have a
Compaq Authorized Reseller or Service Provider install the processor
upgrade. If you plan to install it yourself, read all the instructions carefully
before you begin.
CAUTION:
The thermal pad must be installed or damage will occur to
your processor.
Writer: Project: Installing Hardware Options Comments:
File Name: E-ch3.doc Last Saved On: 4/23/97 11:22 AM
Compaq ProLiant 800 Server Reference Guide
3-9