. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-18
Installing Hardware Options
2. Remove the expansion board cage.
3. Remove the screw at the side of the expansion slot and remove the
graphics controller board.
Figure 3-14.
CAUTION:
Static electricity can damage electronic components or
optional boards. Before beginning these procedures, be sure that you
are discharged of static electricity by briefly touching a grounded
metal object. Refer to Appendix C, "Electrostatic Discharge," for more
information.
Removing the graphics board from the expansion slot
Writer: Project: Installing Hardware Options Comments:
File Name: E-ch3.doc Last Saved On: 4/23/97 11:22 AM