6000 Series - 32-Bit Dualspeed Netflex-2 Controller And; 6500 Series - Scsi Fixed Disk Drive Test Error Codes - Compaq ProLiant 800 Manual

Hide thumbs Also See for ProLiant 800:
Table of Contents

Advertisement

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-28
Diagnostics Tools
6000 Series -
32-Bit DualSpeed NetFlex-2 Controller and
32-Bit DualSpeed Token Ring Controller Test
Error Codes
The 6000 series of Diagnostic error codes identify failures with 32-bit
DualSpeed NetFlex-2/Token Ring Controllers. Corrective action may require
replacement of the 32-bit DualSpeed NetFlex-2/Token Ring Controller.
32-Bit DualSpeed NetFlex-2 Controller and 32-Bit DualSpeed Token
Error Code Range
6000-xx ... 6089-xx Run the System Configuration Utility. Loose or defective cable
6500 Series -
SCSI Fixed Disk Drive Test Error Codes
The 6500 series of Diagnostic error codes identify failures with fixed disk
drives, fixed disk drive controller boards, fixed disk drive cabling, and system
board functions. Corrective action may require replacement of fixed disk drive
cables, fixed disk drive controller, fixed disk, or system board assembly. If
your system uses a drive array controller, see the section for Drive Array
Advanced Diagnostics (DAAD).
Error Code Range
6500-xx ... 6528-xx Loose or defective cable connections may cause error messages. The
Ring Controller Test Error Codes
connections may cause error messages. The controller may require
replacement.
SCSI Fixed Disk Drive Test Error Codes
fixed disk drive, the fixed disk drive controller, or the system board may
require replacement.
Writer: Project: Diagnostics Tools Comments:
File Name: J-ch8.doc Last Saved On: 4/24/97 10:38 AM
Possible Corrective Action
Possible Corrective Action

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents