Compaq ProLiant 800 Manual page 150

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-20 Diagnostics Tools
POST Error Messages
Error Code
1798-Drive Array -
Array Accelerator
Write Error Occurred.
Array Accelerator is
disabled.
1799-Drive Array -
Drive(s) Disabled due
to Array Accelerator
Data Loss.
Select F1 to continue
with logical drives
disabled.
Select F2 to accept
data loss and to
reenable logical
drives.
Beeps only: 2 long +
2 short
(Run System
Configuration Utility -
F10 key)
(RESUME - F1 KEY)
continued
Audible
Beeps
L=Long
S=Short
None Hard parity error while
writing data to posted
writes memory.
None Volume failed because of
loss of data in posted-
writes memory.
2L,2S Power is cycled.
Temperature too hot.
Processor fan not installed
or spinning.
None A configuration error
occurred during POST.
None As indicated to continue.
Writer: Project: Diagnostics Tools Comments:
File Name: J-ch8.doc Last Saved On: 4/24/97 10:38 AM
Probable Source of
Problem
Enable Array
Accelerator.
Press F1 to continue
with logical drives
disabled or F2 to
accept data loss and
reenable logical drive.
Check fans.
Press F10 to run
System Configuration
Utility.
Press the F1 key.
Action