Compaq ProLiant 800 Manual page 45

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-16 Server Management
If you are notified that ASR-2 restarted the server and you have restarted to
Compaq Utilities, use the Inspect Utility or Compaq Insight Manager to view
the critical error in the Critical Error Log. Run Diagnostics to diagnose and
resolve the problem.
You can configure ASR-2 to restart the server into Compaq Utilities to
diagnose the critical error, or to start the operating system to return the server
to operational status as rapidly as possible.
When you enable ASR-2 to start the operating system, the server tries to start
from the primary partition. In this mode, ASR-2 can page you if a critical
error occurs, but you cannot access Compaq Utilities.
When you enable ASR-2 to start Compaq Utilities, your server restarts after a
critical error and loads Compaq Utilities from the system partition on the hard
drive.
You can configure your server to start Compaq Utilities in four different ways:
Without remote console support; for example, to run Compaq Utilities
from the server console only
With remote console support using modems for dial-in access
With remote console support using a modem to dial a predetermined
telephone number
With remote console support through a network connection
(IP or IPX)
Writer: Project: Server Management Comments:
File Name: D-ch2.doc Last Saved On: 4/23/97 11:14 AM