Compaq ProLiant 800 Manual page 86

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-28 Installing Hardware Options
4. Install the guide screw in the front screw hole on the right side of the
bracket.
Figure 3-21.
5. Install the bracket and drive into the drive bay. Secure the bracket with
two screws through the side of the drive cage. Be sure the guide screw
lines up with the guide slot in the drive cage.
Figure 3-22.
Installing the guide screw in the drive bracket
Installing the drive into the chassis
Writer: Project: Installing Hardware Options Comments:
File Name: E-ch3.doc Last Saved On: 4/23/97 11:22 AM