Test Computer - Compaq ProLiant 800 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Test Computer

The Test utility determines if the various computer components are
recognized by the system and functioning properly. Running Test Computer is
optional, but advisable, after you install or connect a new device. However,
this utility does not detect all non-Compaq devices.
You can display, print, or save the information. Your Authorized Compaq
Reseller or Service Provider may ask you to run this utility to assist in
analyzing the system. This information allows the service provider to
reproduce the same environment on another computer for testing.
IMPORTANT:
placing a call to the Compaq Customer Support Center or your local Compaq
Service Provider.
Running Test
To run Test, complete the following steps:
1. Press the Ctrl+Alt+Delete keys to reboot the server.
2. Press F10 when the following prompt appears at the top of the screen
during POST.
Press "F10" key for System Partition Utilities
IMPORTANT:
during this time, you must reboot the server.
3. Select the Diagnostics and Utilities option.
4. Select Test Computer.
5. Select View Device List.
Run Test Computer and have the printed report available before
The text appears for only two seconds. If you do not press F10
Writer: Project: Diagnostics Tools Comments:
File Name: J-ch8.doc Last Saved On: 4/24/97 10:38 AM
Compaq ProLiant 800 Server Reference Guide
8-31