Compaq ProLiant 800 Manual page 187

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A-4 Installing a New Battery
3. Plug the battery connector onto pins 1-4 of header E2 on the system
board.
Figure A-2.
4. Replace the side access panel.
5. Place the sticker included with your battery kit on the back of your
server above the power connector.
6. Plug in the server and reconnect any external devices.
WARNING:
!
equipment:
Attaching the battery on the chassis
To reduce the risk of electric shock or damage to the
Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet
that is easily accessible at all times.
Disconnect power from the server or other product by
unplugging the power cord from either the electrical outlet or
the server or other product.
Writer: Project: Installing a New Battery Comments:
File Name: K-appa.doc Last Saved On: 4/24/97 10:45 AM