Removing The Side Access Panel; Replacing The Side Access Panel - Compaq ProLiant 800 Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Removing the Side Access Panel

To remove the side access panel:
1. If the computer is on, turn it off and disconnect the power cord.
2. Disconnect any other external equipment connected to the computer.
3. Loosen the three thumbscrews on the rear of the unit.
4. Slide the side access panel toward the rear of the unit. See Figure E-1.
5. Lift and remove the panel.

Replacing the Side Access Panel

1. Reverse the above steps to replace the side access panel.
2. If desired, the side access panel can be locked (with a customer-
supplied padlock) to prevent unauthorized access to system
components. See Figure E-2 for information.
CAUTION:
removed. These panels are an integral part of the cooling system and
removing them while the system is running may adversely affect data
integrity.
Do not operate the server with the side access panels
Writer: Project: Installing the Server Comments:
File Name: O-appe.doc Last Saved On: 4/24/97 10:51 AM
Compaq ProLiant 800 Server Reference Guide
E-5