Compaq ProLiant 800 Manual page 52

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compaq System Configuration Utility Pager Settings
for Booting into Compaq Utilities
Pager Data
Dial-out
status
Dial-out
string
Network
status
continued
Setting
Enabled Allows ASR-2 to dial out to a remote workstation. If you
selected this option, Dial In Status is automatically
selected.
To use the dial-out feature, set Dial-Out Status to
Enabled and set the Dial-Out String to the correct phone
number. You must also set the Reset Boot option to Boot
Compaq Utilities. When the system restarts because of
an ASR reset, the administrator is paged via Pager
Status and Pager Dial String, the system restarts to the
Compaq Utilities, and dials out to the phone number
provided in the Dial-Out string. The dial-out number will
be tried five times. If it fails to connect after five
attempts, the modem is put in auto-answer mode.
555-1234 Enter the dial string followed by the remote server's
telephone number.
Enabled To allow network access to Compaq Utilities, set
Network Status to Enabled and make sure the Reset
Boot option is set to Boot Compaq Utilities.
Writer: Project: Server Management Comments:
File Name: D-ch2.doc Last Saved On: 4/23/97 11:14 AM
Description
continued
Compaq ProLiant 800 Server Reference Guide
2-23