Set Atm-Link Default-Pvc - Avaya Cajun P550R Cli Reference Manual

set atm-link default-PVC

Command Mode
Description
Syntax
Sample Output
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Configuration
Sets the default virtual channel for an ATM Link. This command is
used when the VSP is a Replicating. With a Replicating VSP, each
ATM Link in the VSP has its own Default PVC.
In a Non-Replicating VSP, the Default PVC is set for the VSP itself,
not the ATM Link within it.
set atm-link <link-name> default-PVC <pvcId>
Table 1-8. Arguments, Parameters, Keywords
Name
vsportId
pvcId
This example sets the default PVC for ATM Link "Link1" to the PVC
whose ID is 1-0-300.
ATM(configure)# set atm-link Link1 default-
PVC 1-0-300
Default PVC 1-0-300 has been set for ATM Link
Link1
Avaya ATM Uplink Module CLI Commands
Definition
Virtual switch port Identifier. Range is 1 - 128.
Virtual channel identifier. When a PVC is
created, the ATM Uplink module assigns the
vcID to the PVC. The format of the vcID is
<Physical Port>-<VPi>-<VCi> (ex: 1-0-300)
Use the
show pvc <link-name>
list of PVC configured within the ATM Link
Use th
e show atm-link <vsportId>
to get the name of an ATM-Link
[<link-id>]
whose name is greater than 10 characters.
to display the
1-11