Upgrade The Firmware On The Airbridge - NETGEAR Insight Instant AirBridge User Manual

Table of Contents

Advertisement

The user name is admin. The local device password is the one that you specified
the first time that you logged in. The user name and password are case-sensitive.
If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for the Insight network location to
which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
App on an iOS or Android mobile device on page 13).
The Device Status page displays the Device Information section and other sections.
4. Under Management, select Advanced.
The page displays the advanced settings with the Management Mode section at the
top.
5. In the Management Mode section, select one of the following radio buttons:
• NETGEAR Insight Mode. The AirBridge management mode is the NETGEAR
Insight Mode.
• Standalone Mode. The AirBridge management mode is the Standalone Mode.
IMPORTANT: When you change the management mode from Standalone Mode
to NETGEAR Insight Mode, the Insight cloud-based management platform pushes
the latest Insight configuration to the AirBridge.
6. Click the Apply button.
Your settings are saved and applied immediately.

Upgrade the firmware on the AirBridge

You can visit the NETGEAR support website to determine if new firmware is available
for the AirBridge.
If new firmware is available, download the firmware file to your computer. If needed,
unzip the firmware file. Then, update the AirBridge to the new firmware.
Note: Before you upgrade the firmware, we recommend that you read the firmware
release notes, if available. Although it is highly unlikely, a situation might occur that
requires you to reconfigure the AirBridge after a firmware upgrade.
To upgrade the firmware on the AirBridge:
1. Open a web browser from a computer that is connected to the same network as the
AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the AirBridge.
Maintain the AirBridge
Insight Instant AirBridge WBC502 User Manual
98
User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wbc502

Table of Contents