NETGEAR Insight Instant AirBridge User Manual page 125

Table 10. Operation mode is AirBridge Master or Access Point: WiFi device information (Continued)
Setting
RSSI (dBm)
Block
• If the operation mode of the AirBridge is AirBridge Satellite or Client Bridge, the
page displays the 5 GHz backhaul SSID information that is described in the
following table.
Table 11. Operation mode is AirBridge Satellite or Client Bridge: 5 GHz backhaul SSID information
Setting
SSID
BSSID
Connection Status
Wireless Mode
Current Channel
Security
Tx Data Rates (Mbps)
Current noise level
Signal Strength
5. To refresh the information on the page, click the Refresh button.
6. If the operation mode of the AirBridge is AirBridge Master or Access Point, to block
(kick) a WiFi device, do the following:
a. Click the associated Kick button in the Block column on the right.
A pop-up window opens.
b. Click the OK button.
The WiFi device no longer displays on the page. An ACL that denies the MAC
address of the WiFi device is automatically added to the 5 GHz SSID from which
Monitor the AirBridge and its
Network Connections
Insight Instant AirBridge WBC502 User Manual
Description
The received signal strength indicator (RSSI) for the WiFi device. The RSSI is expressed
in decibel-milliwatts (dBm).
For more information, see Step 6.
Description
The 5 GHz backhaul SSID to which the WiFi device is connected.
The MAC address of the radio on the master or access point.
Shows whether the satellite is associated with the master or the client bridge is
associated with an access point.
The WiFi mode. For example, 802.11 ac/n/a.
The WiFi channel. For example, 5.500 GHz (Channel 100).
The WiFi security. For example, WPA2/PSK AES.
The WiFi transmit data rate in Mbps. For example, 400 Mb/s.
The noise level in dBm, For example, -95 dBm.
The signal strength in dBm., For example, -52 dBm.
125 User Manual