NETGEAR Insight Instant AirBridge User Manual page 40

9. In the Wireless Settings - Access Point section, do one of the following:
• To change the default 5 GHZ SSID or another previously enabled 5 GHZ SSID,
click the Edit button for the 5 GHZ SSID.
• To enable and configure a new 5 GHZ SSID, select the Enabled check box for a
disabled 5 GHZ SSID, and then click the Edit button for the 5 GHZ SSID.
A new page opens.
10. To configure the 5 GHZ SSID settings, specify the settings that are described in the
following table:
Setting Description
Wireless Setting - Access Point 5GHz
Enable This check box is selected, otherwise you cannot configure the SSID settings.
SSID The service set ID (SSID), which is the name for the WiFi network with which WiFi clients
can connect.
Hidden SSID To hide the WiFi network name and prevent it from displaying in the scanning list of a WiFi
client, select the Enable radio button. To connect to the WiFi network, a user must know
the WiFi network name.
By default, the Disable radio button is selected.
Client Isolation To prevent WiFi clients that are associated with the same or different WiFi networks on the
access point from communicating with each other, select the Enable radio button. If you
enable client isolation, WiFi clients can still communicate with each other over the Internet.
When the AirBridge mode is disabled, by default, the Disable radio button is selected.
VLAN Isolation To prevent clients on different VLANs from communicating with each other, select the
Enable radio button, and enter the VLAN ID in the ID field. This VLAN ID must already be
defined in your network. The default VLAN ID is 1. The range is from 1 to 4094.
If you enable VLAN isolation, clients can still communicate with each other over the Internet.
By default, the Disable radio button is selected.
L2 Isolation To prevent WiFi and LAN clients on the same access point from communicating with each
other, select the Enable radio button. If you enable L2 isolation, clients can still communicate
with each other over the Internet.
By default, the Disable radio button is selected.
Manually Configure or Change
the Operation Mode
Insight Instant AirBridge WBC502 User Manual
40 User Manual