Manage The Ssh Settings - NETGEAR Insight Instant AirBridge User Manual

which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
App on an iOS or Android mobile device on page 13).
The Device Status page displays the Device Information section and other sections.
4. Under Management, select Advanced.
The page displays the advanced settings with the Management Mode section at the
top.
5. In the HTTPS Setting section, select one of the following Status radio buttons:
• Enable. HTTPS access is enabled.
This is the default setting. We recommend that you keep HTTPS access enabled.
• Disable. HTTPS access is disabled.
6. If HTTPS is enabled, in the HTTPS Setting section, select one of the following HTTPS
Forward radio buttons:
• Enable. An attempt to log in over an HTTP connection is automatically changed
to an HTTPS connection, that is, HTTP access is automatically forwarded to HTTPS
access.
This is the default setting. We recommend that you keep HTTPS forwarding
enabled.
• Disable. An attempt to log in over an HTTP connection is not automatically
changed to an HTTPS connection.
7. Click the Apply button.
Your settings are saved and applied immediately.

Manage the SSH settings

By default secure shell (SSH) access is disabled on the AirBridge. You can enable it.
To manage the SSH settings:
1. Open a web browser from a computer that is connected to the same network as the
AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the AirBridge.
The login page displays.
If your browser does not display the login page but displays a security message and
does not let you proceed, see Log in to the AirBridge after initial setup on page 31.
3. Enter the AirBridge user name and local device password.
Maintain the AirBridge
Insight Instant AirBridge WBC502 User Manual
116 User Manual