Updating Readynas 3200 Firmware - NETGEAR RN12P0610 - ReadyNAS 3200 Software Manual

ReadyNAS 3200 Software Manual
Note: This option does not set the web browser language display—browser settings must
be done using the browser language option.
If you wish, you can select the Allow Unicode for user, group and share names check box to
allow for greater flexibility in non-English speaking regions. This option, once selected, cannot be
reversed.
Note: HTTP and WebDAV access do not work with Unicode user names. Other
restrictions might exist.
If your FTP client uses different character encoding from the NAS character encoding specified in
Unicode, the NAS FTP server will convert it if you select the Enable character encoding
conversion for FTP clients check box.

Updating ReadyNAS 3200 Firmware

The ReadyNAS 3200 device offers the option of upgrading the operating firmware either
automatically using the Remote Update option or by manually loading an update image
downloaded from the NETGEAR website.
Updating from the NETGEAR Web Site
If the ReadyNAS 3200 has Internet access the easiest update option is the Remote option. The
update process updates only the firmware image and does not modify your data volume. However,
it is always a good practice to back up your data before you perform an update.
To use the Remote option, select Update from the main menu and then click the Remote tab. Click
Check for Updates to check for updates on the NETGEAR update server.
Figure 2-29
2-28
v1.0, June 2009
Managing Your ReadyNAS 3200