NETGEAR Insight Instant AirBridge User Manual page 29

(Continued)
Setting Description
Management On this page, you cannot change the default management SSID.
SSID The management SSID lets you connect from your WiFi-enabled computer or mobile
device to the AirBridge to configure and manage the it. This management SSID is not
used for backhaul or regular WiFi client connections.
For more information, see Manage the settings for the 2.4 GHz management SSID on
page 73.
Management Enter a new passphrase (network key or WiFi password) for the management SSID. This
WPA2 passphrase replaces the default passphrase (sharedsecret).
Passphrase The length of the passphrase must be from 8 to 63 characters.
8. Click the Apply button.
Your settings are saved, and the AirBridge restarts.
This process takes about one minute.
The login page displays.
9. If the login page does not open automatically, enter 192.168.0.100 in the address
bar of your browser.
If you changed the IP address (that is, you specified a static IP address), enter the
new IP address.
10. If your browser does not display the login page but displays a security message and
does not let you proceed, see the information in Step 5.
11. Enter the AirBridge user name and local device password.
The user name is admin. The local device password is the one that you just defined
on the Day Zero Easy Setup page. The user name and password are case-sensitive.
12. In the TERMS OF USE section, click the NETGEAR's Terms and Conditions link, and
read the terms of use.
13. If you agree, select the check box to acknowledge that you read and agree with the
terms of use.
You need to select this check box only once. Subsequent times that you log in, the
check box is preselected.
14. Click the Login button.
The Device Status page displays the Device Information section and other sections.
You can now customize the AirBridge settings for your network environment.
Access the AirBridge and Use
the Easy Setup Method
Insight Instant AirBridge WBC502 User Manual
29 User Manual