Log In To The Airbridge After Initial Setup - NETGEAR Insight Instant AirBridge User Manual

Log in to the AirBridge after initial setup

After initial setup, the AirBridge is ready for use and you can change the settings and
monitor the traffic.
Your browser might display a security message. You can either ignore this message or
install the AirBridge's security certificate. Consider the following examples:
• Google Chrome. If Google Chrome displays a Your connection is not private
message, click the ADVANCED link. Then, click the Proceed to 192.168.1.1 (unsafe)
link, in which x.x.x.x represents the IP address of the switch.
• Apple Safari. If Apple Safari displays a This connection is not private message, click
the Show Details button. Then, click the visit this website link. If a warning pop-up
window opens, click the Visit Website button. If another pop-up window opens to
let you confirm changes to your certificate trust settings, enter your Mac user name
and password and click the Update Setting button.
• Mozilla Firefox. If Mozilla Firefox displays a Your connection is not secure message,
click the ADVANCED button. Then, click the Add Exception button. In the pop-up
window that opens, click the Confirm Security Exception button.
• Microsoft Internet Explore. If Microsoft Internet Explorer displays a There is a
problem with this website's security certificate message, click the Continue to this
website (not recommended) link.
• Microsoft Edge. If Microsoft Edge displays a There is a problem with this website's
security certificate message or a similar warning, select Details > Go on to the
webpage.
To log in to the AirBridge's local browser UI:
1. Open a web browser from a computer that is connected to the same network as the
AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the AirBridge.
The login page displays.
If your browser does not display the login page but displays a security message and
does not let you proceed, see the information in the introduction of this task.
3. Enter the AirBridge user name and local device password.
The user name is admin. The local device password is the one that you specified
the first time that you logged in. The user name and password are case-sensitive.
If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for that location (see Connect over
WiFi using the NETGEAR Insight App on an iOS or Android mobile device on page
13).
Access the AirBridge and Use
the Easy Setup Method
Insight Instant AirBridge WBC502 User Manual
31 User Manual