NETGEAR Insight Instant AirBridge User Manual page 61

Table 3. 5 GHz SSIDs on the AirBridge (Continued)
Operation AirBridge Mode
Mode
Access Point N/A
Client Bridge N/A
The AirBridge supports the following WiFi security:
• For an individual 5 GHz SSID, you can configure WPA2-PSK or WPA2-Enterprise
security.
For more information on configuring WPA2-PSK security, see Change or configure
a new 5 GHz SSID for a master or access point on page 62 or Change the 5 GHz SSID
or WiFi security mode for a satellite or client bridge on page 65.
For more information on configuring WPA2-Enterprise security with a RADIUS
authentication server, see Set up WPA2-Enterprise security on a master or access
point on page 69 or Set up WPA2-Enterprise security on a satellite or client bridge
on page 71.
Note: In addition to WPA2-Enterprise security with a RADIUS authentication server,
you can set up a RADIUS accounting server, which you also can use with WPA2-PSK.
That is, the WiFi security can be WPA-PSK and you can use a RADIUS accounting
server.
• Depending on the operation mode and AirBridge mode, you can configure security
settings such as a hidden SSID, client isolation, VLAN isolation, an L2 isolation, and
you can entirely disable a 5 GHz SSID that is not the default 5 GHz SSID.
For more information, see Change or configure a new 5 GHz SSID for a master or
access point on page 62.
• Depending on the operation mode and AirBridge mode, you can enable and
configure a guest network.
For more information, see Configure a guest network on an access point on page
67.
• Depending on the operation mode and AirBridge mode, you can set up a WiFi MAC
filter.
For more information, see Set up a MAC filter for a 5 GHz SSID on page 89.
Manage the WiFi and Radio
Features
Insight Instant AirBridge WBC502 User Manual
Number of
5 GHz SSIDs
8
1
WiFi Link Partners
WiFi clients, AirBridge, and any WiFi AP
AirBridge or any WiFi AP
61 User Manual