Restore The Airbridge Configuration Settings - NETGEAR Insight Instant AirBridge User Manual

The name of the backup file is backup-WBC502-yyyy-mm-dd.tar.gz, in which
yyyy is the year, mm is the month, and dd is the date.
An example of a name of a backup file is backup-WBC502-2020-01-18.tar.gz.
7. Follow the directions of your browser to save the file.

Restore the AirBridge configuration settings

If you backed up the configuration settings (see Back up the AirBridge configuration
settings on page 102), you can restore the configuration settings from the backup file.
To restore the AirBridge's configuration settings from the backup file:
1. Open a web browser from a computer that is connected to the same network as the
AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the AirBridge.
The login page displays.
If your browser does not display the login page but displays a security message and
does not let you proceed, see Log in to the AirBridge after initial setup on page 31.
3. Enter the AirBridge user name and local device password.
The user name is admin. The local device password is the one that you specified
the first time that you logged in. The user name and password are case-sensitive.
If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for the Insight network location to
which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
App on an iOS or Android mobile device on page 13).
The Device Status page displays the Device Information section and other sections.
4. Under System Manager, select Firmware.
The page displays the Firmware Upgrade section and the Backup/Restore Settings
section.
5. In the Backup/Restore Settings section, click the Restore New Setting Choose File
button and navigate to and select the saved configuration file (that is, the backup
file).
The name of the backup file is backup-WBC502-yyyy-mm-dd.tar.gz, in which
yyyy is the year, mm is the month, and dd is the date.
An example of a name of a backup file is backup-WBC502-2020-01-18.tar.gz.
6. Click the Import button.
The page displays the restoration progress.
Maintain the AirBridge
Insight Instant AirBridge WBC502 User Manual
103 User Manual