Manage The Date And Time Settings - NETGEAR Insight Instant AirBridge User Manual

When the restoration is finished, the login page displays.

Manage the date and time settings

By default, the AirBridge is configured to automatically get the date and time from an
Network Time Protocol (NTP) server that is preconfigured.
You can also manually set the date and time, configure a different time zone from the
one that you specified on the Day One Easy Setup page, and specify daylight saving
time settings.
To manage the date and time settings:
1. Open a web browser from a computer that is connected to the same network as the
AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the AirBridge.
The login page displays.
If your browser does not display the login page but displays a security message and
does not let you proceed, see Log in to the AirBridge after initial setup on page 31.
3. Enter the AirBridge user name and local device password.
The user name is admin. The local device password is the one that you specified
the first time that you logged in. The user name and password are case-sensitive.
If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for the Insight network location to
which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
App on an iOS or Android mobile device on page 13).
The Device Status page displays the Device Information section and other sections.
4. Under Management, select Time Zone.
The page that displays shows the Date and Time Settings section and the Time Zone
section.
5. To configure the date and time, in the Date and Time Settings section, select one of
the following radio buttons:
• Manually Set Date and Time. Specify the date and time settings by doing one
of the following:
- Enter the setting manually by doing the following:
a. In the Date fields, specify the year, month, and date.
b. In the Time fields, specify the hour and minutes.
Use 24-hour format.
Maintain the AirBridge
Insight Instant AirBridge WBC502 User Manual
108 User Manual