NETGEAR Insight Instant AirBridge User Manual page 99

The login page displays.
If your browser does not display the login page but displays a security message and
does not let you proceed, see Log in to the AirBridge after initial setup on page 31.
3. Enter the AirBridge user name and local device password.
The user name is admin. The local device password is the one that you specified
the first time that you logged in. The user name and password are case-sensitive.
If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for the Insight network location to
which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
App on an iOS or Android mobile device on page 13).
The Device Status page displays the Device Information section and other sections.
4. Under System Manager, select Firmware.
The page displays the Firmware Upgrade section and the Backup/Restore Settings
section.
The current firmware version and the device version display.
5. Locate and select the firmware file on your computer by doing the following:
a. In the Firmware Upgrade section, click the Choose File button.
b. Navigate to the firmware file.
The filename ends in .bin.
c. Select the firmware file.
6. Click the Upload button.
The page displays the upgrade progress.
WARNING: To avoid the risk of corrupting the firmware, do not interrupt the
upgrade. For example, do not close the browser, click a link, or load a new page.
Do not turn off the AirBridge. Wait until the AirBridge finishes.
When the upgrade is finished, the login page displays. The firmware version displays
on the login page.
Maintain the AirBridge
Insight Instant AirBridge WBC502 User Manual
99 User Manual