Manage Client Limits - NETGEAR Insight Instant AirBridge User Manual

7. On the blue bar, select a new bit rate by clicking the white dot that represents the
bit rate.
The bit rate is expressed in Mbps.
8. Click the Save button.
Your settings are saved to be applied later. The page closes. The Wireless Settings
page displays again.
A pop-up window opens. The window shows the number of changes to be applied.
You can either make more changes (also on other pages) or apply the changes now.
9. To apply the changes now, click the Apply button in the pop-up window.
Your changes are applied immediately. If the WiFi link must be reestablished, the
page displays the number of seconds before the AirBridge is back online.

Manage client limits

If the AirBridge functions as a master with the AirBridge mode disabled or as an access
point, by default, a maximum of 32 WiFi client can associate with the AirBridge.
You can specify a lower or higher number of maximum WiFi clients. The range is from
1 to 127. The maximum number applies to all clients connected to all 5 GHz SSIDs on
the AirBridge. You cannot set client limits for individual 5 GHz SSIDs.
You can also disable client limits entirely, allowing an unlimited number of clients to
associate with the AirBridge.
To manage client limits:
1. Open a web browser from a computer that is connected to the same network as the
AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the AirBridge.
The login page displays.
If your browser does not display the login page but displays a security message and
does not let you proceed, see Log in to the AirBridge after initial setup on page 31.
3. Enter the AirBridge user name and local device password.
The user name is admin. The local device password is the one that you specified
the first time that you logged in. The user name and password are case-sensitive.
If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for the Insight network location to
which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
App on an iOS or Android mobile device on page 13).
Manage Advanced WiFi and
Radio Features
Insight Instant AirBridge WBC502 User Manual
83 User Manual