NETGEAR Insight Instant AirBridge User Manual page 17

Note: After you save the basic settings that are shown on the page, the Day Zero
Easy Setup page no longer displays when you log in. Instead, a login window opens.
After you log in, the Dashboard page displays.
5. Enter the settings that are described in the following table.
Setting Description
Country/Region From the menu, select the country and region in which the AirBridge is operating.
Note: Make sure that the country is set to the location where the device is operating. You
are responsible for complying with the local, regional, and national regulations that are
set for channels, power levels, and frequency ranges.
Note: It might not be legal to operate the AirBridge in a region other than the regions
listed in the menu. If your country or region is not listed, check with your local government
agency.
Time Zone From the menu, select the time zone for the country and region in which the AirBridge is
operating.
DHCP Client By default, the DHCP client of the AirBridge allows the AirBridge to receive an IP address
from a DHCP server (or router that functions as a DHCP server) in your network.
To set up the AirBridge with a static (fixed) IP address, do the following:
a. Select the Disable radio button.
b. Specify the IP address, IP subnet mask, IP address of the default gateway, and IP address
AP Name As an option, enter a new system name for the AirBridge. The name must contain
alphanumeric characters, cannot be longer than 15 characters, and cannot contains spaces.
The name can contain hyphens, but cannot start or end with a hyphen.
By default, the system name is WBC502, which is the AirBridge's model number.
AP Login New Enter a new local device password. This is the password that you must use to log in to the
Password AirBridge's local browser UI. (It is not the password that you use for WiFi access.)
The password must be 8 to 63 characters in length and must contain at least one uppercase
letter, one lowercase letter, and one number. The following special characters are allowed:
! @ # $ % ^ & * ( )
Write down and save the password for future use.
Confirm New Enter exactly the same password that you entered in the AP Login New Password field.
Password
Access the AirBridge and Use
the Easy Setup Method
Insight Instant AirBridge WBC502 User Manual
Additional fields display.
of the DNS server.
17 User Manual