Set Up Email Alerts - NETGEAR Insight Instant AirBridge User Manual

The user name is admin. The local device password is the one that you specified
the first time that you logged in. The user name and password are case-sensitive.
If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for the Insight network location to
which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
App on an iOS or Android mobile device on page 13).
The Device Status page displays the Device Information section and other sections.
4. Under System Manager, select Log.
The System Log page displays.
5. To manage the remote log server capability, select one of the following Remote Log
radio buttons:
• Enable. The AirBridge sends log messages to a remote log server.
You must specify the IP address of the remote log server (see Step 7).
• Disable. The AirBridge does not send log messages to a remote log server.
This is the default settings.
6. If the remote log server capability is enabled, to manage whether the traffic log is
sent to the remote log server, select one of the following Traffic Log radio buttons:
• Enable. The AirBridge sends its traffic log to the remote log server.
• Disable. The AirBridge does not send its traffic log to the remote log server.
This is the default settings.
7. In the Log Server IP Address field, enter the IP address of the remote log server.
8. In the Log Server Port field, enter the port number that the AirBridge uses to contact
the remote log server.
By default, the port number is 514.
9. Click the Apply button.
Your settings are saved and applied immediately.

Set up email alerts

You can specify an email address to which the AirBridge automatically can send an
alerts when the configuration of the AirBridge is changed.
Maintain the AirBridge
Insight Instant AirBridge WBC502 User Manual
112 User Manual