NETGEAR Insight Instant AirBridge User Manual page 90

If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for the Insight network location to
which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
App on an iOS or Android mobile device on page 13).
The Device Status page displays the Device Information section and other sections.
4. Under Network, select Wireless.
The Wireless Settings page displays.
5. In the Wireless Settings - 5G section, click the Edit button for the 5 GHz SSID.
A new page opens.
6. Scroll down to the Wireless MAC Filter section.
7. From the ACL Mode menu, select one of the following:
• Deny MAC in the List. The MAC addresses that you add to the list are denied
access but all other MAC address are allowed access.
• Allow MAC in the List. The MAC addresses that you add to the list are allowed
access but all other MAC address are denied access.
By default, the selection is Disabled and all MAC addresses are allowed.
8. To add MAC addresses to the list, do the following:
a. Enter the MAC address of a WiFi device in the fields.
b. Click the Add button.
The MAC address is added to the list. The address displays, together with an
entry number, and a Delete button, allowing you to remove the MAC address
from the list.
c. To add another MAC address, repeat steps a and b.
9. Click the Save button.
Your settings are saved to be applied later. The page closes. The Wireless Settings
page displays again.
A pop-up window opens. The window shows the number of changes to be applied.
You can either make more changes (also on other pages) or apply the changes now.
10. To apply the changes now, click the Apply button in the pop-up window.
Your changes are applied immediately. If the WiFi link must be reestablished, the
page displays the number of seconds before the AirBridge is back online.
Manage Advanced WiFi and
Radio Features
Insight Instant AirBridge WBC502 User Manual
90 User Manual