NETGEAR Insight Instant AirBridge User Manual page 72

The Wireless Settings page displays.
5. In the Wireless Settings - 5G section, click the Edit button for the 5 GHz SSID.
A new page opens.
6. From the Security Mode menu, select WPA2-Enterprise.
Additional fields displays.
Note: For a client bridge, you can also select WPA-Enterprise. Use that option only
if the link partner is not an AirBridge functioning as an access point but another type
of access point that supports WPA-Enterprise.
7. Configure the WPA2-Enterprise settings as described in he following table.
The settings that you must enter depend on the configuration of the master or access
point and the RADIUS server.
Setting
EAP Method
EAP Authentication
Authentication Identity
Authentication
Password
8. Click the Save button.
Your settings are saved to be applied later. The page closes. The Wireless Settings
page displays again.
A pop-up window opens. The window shows the number of changes to be applied.
You can either make more changes (also on other pages) or apply the changes now.
Manage the WiFi and Radio
Features
Insight Instant AirBridge WBC502 User Manual
Description
From the EAP Method menu, select one of the following Extensible Authentication
Protocol (EAP) methods:
• TTLS. Tunneled Transport Layer Security.
• PEAP. Protected Extensible Authentication Protocol.
From the EAP Authentication menu, select one of the following EAP authentication
methods:
• MSCHAP. Microsoft Challenge-Handshake Authentication Protocol version 1
(MS-CHAPv1).
• MSCAPV2. Microsoft Challenge-Handshake Authentication Protocol version 2
(MS-CHAPv2).
Enter the user name that is required for the AirBridge to access the authentication
RADIUS server during the authentication process.
Enter the password (shared key) that is required for the AirBridge to access the
authentication RADIUS server during the authentication process. This password must
be the same as the one that is configured on the master or satellite.
72 User Manual