NETGEAR Insight Instant AirBridge User Manual page 113

To set up email alerts:
1. Open a web browser from a computer that is connected to the same network as the
AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the AirBridge.
The login page displays.
If your browser does not display the login page but displays a security message and
does not let you proceed, see Log in to the AirBridge after initial setup on page 31.
3. Enter the AirBridge user name and local device password.
The user name is admin. The local device password is the one that you specified
the first time that you logged in. The user name and password are case-sensitive.
If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for the Insight network location to
which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
App on an iOS or Android mobile device on page 13).
The Device Status page displays the Device Information section and other sections.
4. Under Management, select Advanced.
The page displays the advanced settings with the Management Mode section at the
top.
5. In the Email Alert section, configure the following settings:
a. Select the Status Enable check box.
The field and menus become available.
b. In the From field, enter the originating email address.
c. In the To field, enter the email address of the recipient.
d. In the Subject field, enter the subject information of the email or leave the default
subject information.
The subject information is [Email-Alert][WBC502][BC:A5:11:7E:EC:F8]
Configuration Changed.
e. In the Username field, enter the user name to access the originating email
account.
f. In the Password field, enter the password to access the originating email account.
g. In the SMTP Server field, enter the name of the outgoing email server name.
h. In the Port field, enter the port number that the AirBridge uses to contact the
SMTP server.
By default, the port number is 514.
Maintain the AirBridge
Insight Instant AirBridge WBC502 User Manual
113 User Manual