Ups; Update Firmware - NETGEAR RND4000v2 Software Manual

Readynas for home raidiator 5.3
Hide thumbs Also See for RND4000v2:
Table of Contents

Advertisement

4.
Click the Yes button.
Your system shuts down, and if you selected the reboot option, restarts.
5.
Close the Dashboard browser window.
6.
When you reboot, use RAIDar to reconnect to your ReadyNAS system.
For more information, see

UPS

Connecting your ReadyNAS storage system to an uninterruptible power supply (UPS) device
is an easy way to protect against data loss due to power failures.
If you set up email notifications, your ReadyNAS system sends you an email alert message if
the UPS status changes. For example, if a power failure forces the UPS into battery mode, or
when the battery is low, you receive an email message. When the battery is low, your
ReadyNAS system automatically shuts down safely.
To connect your ReadyNAS system to a UPS:
1.
Connect the ReadyNAS power cable to the UPS.
2.
Connect the UPS USB monitoring cable to a USB port on your ReadyNAS system.
Dashboard detects compatible UPS devices automatically and displays information about
the UPS on the status bar that displays at the bottom of the Configure screens.
For a list of compatible UPS devices, see the hardware compatibility list at
http://www.readynas.com/?page_id=92.
3.
(Optional) Hover your cursor over the UPS LED icon to display more details.

Update Firmware

Firmware is the software that operates your ReadyNAS storage system. It is written directly
to your system's read-only memory. NETGEAR periodically releases firmware updates to
improve your storage system. Because firmware is stored in read-only memory, updating the
firmware requires a special process.
The firmware on your ReadyNAS system is called RAIDiator, and your system uses the 5.3
version of RAIDiator. Updates are numbered chronologically, for example:
RAIDiator 5.3.1
RAIDiator 5.3.2
You can update the firmware on your ReadyNAS system remotely from the NETGEAR
website or manually from a local drive. The update process changes only the firmware; it
does not modify your data.
ReadyNAS for Home RAIDiator 5.3
RAIDar
on page 8.
System Management
63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Readynas duo v2Readynas nv+ v2

Table of Contents