NETGEAR Insight Instant AirBridge User Manual page 94

To change the DHCP server settings for a guest WiFi network:
1. Open a web browser from a computer that is connected to the same network as the
AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the AirBridge.
The login page displays.
If your browser does not display the login page but displays a security message and
does not let you proceed, see Log in to the AirBridge after initial setup on page 31.
3. Enter the AirBridge user name and local device password.
The user name is admin. The local device password is the one that you specified
the first time that you logged in. The user name and password are case-sensitive.
If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for the Insight network location to
which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
App on an iOS or Android mobile device on page 13).
The Device Status page displays the Device Information section and other sections.
4. Under Network, select Wireless.
The Wireless Settings page displays.
5. Scroll down to the Guest Network DHCP Server Settings section.
You can change the DHCP server settings for a guest network only of you enabled
at least one guest network on a 5 GHz SSID. Otherwise, the fields are masked out.
6. Configure the settings that are described in the following table, keeping in mind
that the IP address, starting IP address, and ending IP address must be in the same
range.
Setting
IP Address
Subnet Mask
Starting IP Address
Manage Advanced WiFi and
Radio Features
Insight Instant AirBridge WBC502 User Manual
Description
The IP address for the guest network. The default IP address is 192.168.200.1.
The subnet mask associated with the IP address. The default subnet mask is
255.255.255.0.
The starting IP address in the address range from which a WiFi client on a guest
network can be assigned an IP address. The default starting IP address is
192.168.200.100.
94 User Manual