Manage The Radio Transmit Power - NETGEAR Insight Instant AirBridge User Manual

6. Do one of the following:
• To select a specific channel, click the button for the channel and frequency.
• To enable automatic channel allocation, click the All button.
Note: The None button lets you reset all channels before you select one or more
specific channels. The U-NNI buttons lets you select specific groups of channels.
7. Click the Save button.
Your settings are saved to be applied later. The page closes. The Wireless Settings
page displays again.
A pop-up window opens. The window shows the number of changes to be applied.
You can either make more changes (also on other pages) or apply the changes now.
8. To apply the changes now, click the Apply button in the pop-up window.
Your changes are applied immediately. If the WiFi link must be reestablished, the
page displays the number of seconds before the AirBridge is back online.

Manage the radio transmit power

By default, the transmit power for the 5 GHz radio on the AirBridge is automatically
assigned.
You can disable automatic assignment and set a specific transmit power. However, note
the following:
• If you set the transmit power too high, the AirBridge might not be able to connect
to another WiFi device such as a master or access point.
• If you set the transmit power too low, WiFi clients might not be able to connect to
the AirBridge.
Make sure that you comply with the regulatory requirements for total radio frequency
(RF) output power in your country.
WARNING: Make sure that the country is set to the location where the device is
operating (see Change the country and region of operation on page 54). You are
responsible for complying with the local, regional, and national regulations that are set
for channels, power levels, and frequency ranges.
Manage Advanced WiFi and
Radio Features
Insight Instant AirBridge WBC502 User Manual
80 User Manual