NETGEAR Insight Instant AirBridge User Manual page 146

Table 12. AirBridge factory default settings (Continued)
Feature
Client limits
DHCP server
Default radio features (not operation mode-dependent features)
Radio transmission power
Channel
Bit rate
Distance
WiFi networks (SSIDs)
2.4 GHz management SSID
5 GHz SSIDs
Hidden SSID
Client isolation
VLAN isolation
L2 isolation
Fast roaming
WiFi MAC filter
WiFi traffic shaping
Factory Default Settings and
Technical Specifications
Insight Instant AirBridge WBC502 User Manual
Default Setting
32 when the operation mode is Access Point
Not applicable in any other operation mode
Enabled when the operation mode is Access Point
Not applicable in any other operation mode
Automatic (Auto RF)
Auto
The available channels depend on the configured region and country
Automatic
1 km (0.6 mil)
NETGEARXXXXXX-SETUP
XXXXXX represents the last six digits of the MAC address of the LAN interface of
the AirBridge.
The WiFi security is WPA2-PSK
The default WiFi passphrase is sharedsecret.
The number of 5 GHz SSID that are supported depends on the operation mode and
the AirBridge mode:
NETGEARXXXXXX_1
NETGEARXXXXXX_2
NETGEARXXXXXX_3
NETGEARXXXXXX_4
NETGEARXXXXXX_5
NETGEARXXXXXX_6
NETGEARXXXXXX_7
NETGEARXXXXXX_8
XXXXXX represents the last six digits of the MAC address of the LAN interface of
the AirBridge.
For any 5 GHz SSID, the WiFi security is WPA2-PSK
For any 5 GHz SSID, the default WiFi passphrase is sharedsecret.
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
146 User Manual