Configure And View The Logs - NETGEAR Insight Instant AirBridge User Manual

- Synchronize the date and time setting with the computer from which you log
in to the local browser UI of the AirBridge by clicking the Synchronize with
PC button.
• Automatically Get Date and Time. The AirBridge automatically gets the date
and time from the Network Time Protocol (NTP) server that is specified in the
NTP Server field.
This is the default setting. You can specify a different NTP server from the one
that is preconfigured.
6. To configure a different time zone from the one that you specified on the Day One
Easy Setup page, in the Time Zone section, do one of the following:
• Select the Auto Detect check box.
The AirBridge detects the time zone automatically.
• Clear the Auto Detect check box and select a time zone from the Time Zone
menu.
If you manually select a time zone, you can also manually configure daylight
saving time settings (see the next step).
7. To manually enable and configure daylight saving time settings, in the Time Zone
section, do the following:
a. Select the Enable Daylight Saving check box.
b. From the Start menus, select the month, day, and time that daylight saving time
must start.
c. From the End menus, select the month, day, and time that daylight saving time
must end.
8. Click the Apply button.
Your settings are saved and applied immediately.

Configure and view the logs

The AirBridge generates messages in response to events, faults, errors, changes in
configuration, and other occurrences. The messages are stored locally. In addition, you
can configure the AirBridge to forward the messages to a remote server for monitoring
purposes or long-term archival storage. Local and remote configuration of the logging
capability includes filtering of messages logged or forwarded based on their severity.
Maintain the AirBridge
Insight Instant AirBridge WBC502 User Manual
109 User Manual