Quick Tips For Troubleshooting - NETGEAR Insight Instant AirBridge User Manual

The IPv4 Port field is fixed at port number 5201. The IPv6 Port field is fixed at port
number 60001.
9. Click the Start button.
The AirBridge performs the speed test. The results display on the page.

Quick tips for troubleshooting

The AirBridge is unresponsive or does not function normally.
If the AirBridge is unresponsive or does not function normally, restart both the power
adapter and the AirBridge:
1. Unplug the power cable of the power adapter to which the AirBridge is connected.
2. Wait 30 seconds.
3. Plug in the power cable of the power cable.
4. Wait two minutes.
You cannot connect over WiFi to the local browser UI.
If you cannot connect over WiFi to the local browser UI of AirBridge, try the following:
• Make sure that the 2.4 GHz management interface was not automatically turned off
or disabled.
For more information, see Disable the 2.4 GHz management SSID on page 75 and
Disable the idle time-out for the 2.4 GHz management SSID on page 74.
• Make sure that the WiFi settings in your WiFi-enabled computer or WiFi device and
AirBridge match exactly.
For a device that is connected over WiFi to the local browser UI , the WiFi network
name (SSID) and WiFi security settings of the 2.4 GHz management interface AirBridge
and WiFi device must match exactly.
Perform Diagnostics and
Troubleshooting
Insight Instant AirBridge WBC502 User Manual
133 User Manual