NETGEAR Insight Instant AirBridge User Manual page 64

(Continued)
Setting Description
L2 Isolation To prevent WiFi and LAN clients on the same access point from communicating with each
other, select the Enable radio button. If you enable L2 isolation, clients can still communicate
with each other over the Internet.
By default, the Disable radio button is selected.
Wireless Security
Security Mode From the Security Mode menu, select WPA2-PSK or WPA2-Enterprise for the connection
to the selected SSID.
For information about WPA2-Enterprise, see Set up WPA2-Enterprise security on a master
or access point on page 69.
Note: We recommend that you set up security, although in certain situations, and if you
are aware of the risks, you can select None.
Encryption If you select WPA2-PSK from the Security Mode menu, this field is fixed at AES. You cannot
select another option.
Passphrase If you select WPA2-PSK from the Security Mode menu, enter a passphrase (network key
or WiFi password). The length of the passphrase must be from 8 to 63 characters.
If you are configuring a master, you must enter the same passphrase on a satellite that must
connect to the master.
If you are configuring an access point, you must enter the same passphrase on a client
bridge that must connect to the access point. WiFi clients must enter the same passphrase
enter to connect to the SSID.
Group Key The period in seconds that the group key changes. The period can be from 30 to 3600
Update Interval seconds. The default period is 3600 seconds (1 hour).
If you enter 0, the update interval is disabled and the group key is not changed. For greater
security, we recommend that you do not disable the update interval so that the group key
can be changed automatically.
Manage the WiFi and Radio
Features
Insight Instant AirBridge WBC502 User Manual
64 User Manual