Upgrading The Firmware; Upgrading The Wireless Management System Firmware - NETGEAR WMS5316 - ProSafe 16-AP Wireless Management System Reference Manual

ProSafe 16 AP Wireless Management System WMS5316 Reference Manual
2. Click Apply to save your change.

Upgrading the Firmware

You can use the Firmware Upgrade page to install newer versions of firmware for the
Wireless Management System or for access points.

Upgrading the Wireless Management System Firmware

Warning: In some cases, such as a major upgrade, you may need to erase the
configuration and manually reconfigure the Wireless Management System
after upgrading it. See the Release Notes included with the software to find
out if you need to reconfigure.
To upgrade the firmware:
1. Go to the NETGEAR website
new versions of the firmware.
Warning: Once you click Upload do NOT interrupt the process of sending the new
2. Download the new software.
3. On the Maintenance tab select Upgrade > System Upgrade:
Figure 7-11
Maintenance
www.netgear.com
firmware to the Wireless Management System and restarting the unit.
v1.0, March 2010
customer service downloads section to get
7-9