View The 5 Ghz Wifi And Lan Traffic Load - NETGEAR Insight Instant AirBridge User Manual

View the 5 GHz WiFi and LAN traffic load

You can view the 5 GHz WiFi and LAN traffic load on the AirBridge.
To view the 5 GHz WiFi and LAN traffic load:
1. Open a web browser from a computer that is connected to the same network as the
AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the AirBridge.
The login page displays.
If your browser does not display the login page but displays a security message and
does not let you proceed, see Log in to the AirBridge after initial setup on page 31.
3. Enter the AirBridge user name and local device password.
The user name is admin. The local device password is the one that you specified
the first time that you logged in. The user name and password are case-sensitive.
If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for the Insight network location to
which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
App on an iOS or Android mobile device on page 13).
The Device Status page displays the Device Information section and other sections.
4. Under Overview, select Realtime.
The page that displays shows the CPU load. By default, the Load tab is selected.
5. Select the Traffic tab.
The page displays traffic information for the default 5 GHz SSID.
The traffic load is displayed as a graph, which is updated every three seconds and
covers a maximum period of three minutes.
The page also displays the current inbound and outbound traffic loads, the average
inbound and outbound traffic loads, and the peak inbound and outbound traffic
loads, each of which is expressed in kilobytes per second (KB/s), and is measured
during the previous three minutes.
6. If you configured one or more other 5 GHz SSIDs on the AirBridge), to view the traffic
information for another 5 GHz SSID, select the tab for the SSID.
The page displays traffic information for the selected 5 GHz SSID.
7. To view the traffic information for the wired connection, select the LAN tab.
The page displays traffic information for the Ethernet ports.
Monitor the AirBridge and its
Network Connections
Insight Instant AirBridge WBC502 User Manual
127 User Manual