About Netgear Insight - NETGEAR Insight Instant AirBridge User Manual

You can mount the AirBridge outside to a wall or pole and provide power to the
AirBridge through an Ethernet cable that is connected to the provided power adapter,
which must be installed indoors. The AirBridge integrates a high-gain directional antenna
for a line of sight connection to other AirBridges or WiFi clients.
The AirBridge provides two 10/100/1000BASE-T RJ-45 LAN ports for network
connections. One LAN port must be connected to the provided power adapter. Use
Category 5e (Cat 5e) or higher-rated Ethernet cables terminated with RJ-45 connectors
to make Gigabit connections.
For more information about the hardware, see the hardware installation guide.
The AirBridge provides administrative management options that let you configure,
monitor, and control the AirBridge and the WiFi network:
• Using the local browser user interface (UI) you can configure the AirBridge and set
up a WiFi connection between two ore more units in any of the supported operation
modes. This manual (the user manual) describes the options that are available to
you when you use the local browser UI.
• Using NETGEAR Insight, you can set up a pair or a group of AirBridges, with one
AirBridge functioning as the master and one or more other AirBridges functioning
as satellites.
For more information about NETGEAR Insight, visit netgear.com/insight and see the
NETGEAR knowledge base articles at netgear.com/support.

About NETGEAR Insight

The AirBridge supports the NETGEAR Insight app, which lets you set up and manage
the AirBridge from your iOS or Android mobile device and connects to the Insight
cloud-based management platform. For Insight Premium and Insight Pro subscribers,
the AirBridge also supports the Insight Cloud portal, which is the website that provides
access to the Insight cloud-based management platform.
This user manual describes the local browser user interface (UI). For more information
about NETGEAR Insight, visit insight.netgear.com and see the NETGEAR knowledge
base at netgear.com/support/product/insight.aspx.
If you install the AirBridge as a NETGEAR Insight managed device, the settings for
features that you can manage through the Insight app and Insight Cloud portal are
masked out in the local browser UI. However, using the local browser UI, you can still
manage the settings for certain features that are not yet supported in Insight. For more
information, visit the NETGEAR knowledge base at
netgear.com/support/product/insight.aspx and search for What is Hybrid Management
Mode.
Access the AirBridge and Use
the Easy Setup Method
Insight Instant AirBridge WBC502 User Manual
8 User Manual