1-Port T1/E1 Mini-Physical Interface Module Key Features; 1-Port T1/E1 Mini-Physical Interface Module Hardware Specifications - Juniper SRX Series Manual

1-Port T1/E1 Mini-Physical Interface Module Supported Loopback Diagnostics | 70
1-Port T1/E1 Mini-Physical Interface Module Basic Configuration | 209

1-Port T1/E1 Mini-Physical Interface Module Key Features

The 1-Port T1/E1 Mini-Physical Interface Module (Mini-PIM) provides the following key features:
Channel service unit/data service unit (CSU/DSU) to eliminate the need for a separate external device
56-Kbps and 64-Kbps operating modes
Independent internal and external clocking option
Alarm reporting with a 24-hour history maintained
Loopback, BERT, FDL (T1 only), and Long Buildout (T1 only) diagnostics
Multilink Frame Relay and Multilink PPP support
RELATED DOCUMENTATION
1-Port T1/E1 Mini-Physical Interface Module Overview | 66

1-Port T1/E1 Mini-Physical Interface Module Hardware Specifications | 67

1-Port T1/E1 Mini-Physical Interface Module Network Interface Specifications | 23
MTU Default and Maximum Values for Physical Interface Modules | 12
1-Port T1/E1 Mini-Physical Interface Module Supported Standards | 69
1-Port T1/E1 Mini-Physical Interface Module LEDs | 68
1-Port T1/E1 Mini-Physical Interface Module Supported Loopback Diagnostics | 70
1-Port T1/E1 Mini-Physical Interface Module Basic Configuration | 209
1-Port T1/E1 Mini-Physical Interface Module Hardware Specifications
Table 35 on page 68 gives the physical specifications of the 1-Port T1/E1 Mini-Physical Interface Module
(Mini-PIM).
67