Connector To Rj-48 Connector (Crossover) Pinouts For The 1-Port T1/E1 Mini-Physical Interface Module - Juniper SRX Series Manual

Table 68: RJ-48 Connector to RJ-48 Connector (Straight) Pinouts (continued)
RJ-48 Pin (on 1-Port T1/E1
Mini-PIM)
5
3
6
7
8
RELATED DOCUMENTATION
RJ-48 Connector to RJ-48 Connector (Crossover) Pinouts for the 1-Port T1/E1 Mini-Physical Interface
Module | 129
RJ-48 Connector to DB-15 Connector (Straight) Pinouts for the 1-Port T1/E1 Mini-Physical Interface
Module | 130
RJ-48 Connector to DB-15 Connector (Crossover) Pinouts for the 1-Port T1/E1 Mini-Physical Interface
Module | 132
1-Port T1/E1 Mini-Physical Interface Module Overview | 66
RJ-48 Connector to RJ-48 Connector (Crossover) Pinouts for the 1-Port
T1/E1 Mini-Physical Interface Module
Table 69 on page 129 gives RJ-48 connector to RJ-48 connector (crossover) pinouts for the 1-Port T1/E1
Mini-Physical Interface Module (Mini-PIM).
Table 69: RJ-48 Connector to RJ-48 Connector (Crossover) Pinouts
RJ-48 Pin (on T1/E1
Mini-PIM)
1
2
RJ-48 Pin (Data Numbering
Form)
5
3
6
No connect
No connect
RJ-48 Pin (Data Numbering
Form)
4
5
Signal
TX, Tip, +
Shield/Return/Ground
Shield/Return/Ground
No connect
No connect
Signal
RX/Ring/– <––>TX/Ring/–
RX/Tip/+ <––>TX/Tip/+
129