Port Module Components; Port Module Leds - Juniper SRX 5600 Installation Instructions Manual

SRX 5600 and SRX 5800 Services Gateway Flex IOC and Port Module Installation Instructions

Port Module Components

Each port module consists of the following components:

Port Module LEDs

LEDs on the faceplate of each port module indicate the status of the module and of
each port. Table 2 on page 4, Table 3 on page 4, and Table 4 on page 5 describe
the LEDs on each port module type.
Table 2: 4-Port 10-Gigabit XFP Ethernet Port Module LEDs
Table 3: 16-Port SFP Ethernet Port Module LEDs
4
Flex I/O Cards and Port Modules
Midplane connectors and power circuitry
Processor subsystem, including a 1.2-GHz CPU, a system controller, and 1 GB
of SDRAM
Port module cover, which functions as a ground plane and a stiffener
Physical I/O port connectors
Ethernet switch
Online button (behind pinhole) for bringing the port module online and offline
Port module slot connectors and power circuitry
Label Color State
Green On steadily
OK/FAIL
Red On steadily
Green On steadily
LINK
Off
Green Blinking
TX/RX
Off
Label Color State
Green On steadily
OK/FAIL
Red On steadily
Link Green On steadily
0
through
15
Off
Description
Port module is functioning normally.
Port module has failed.
Link is active.
No link.
Port is receiving or transmitting data.
No activity.
Description
Port module is functioning normally.
Port module has failed.
Link is active.
No link.