Texas Instruments AFE79 Series Programming & User Manual page 1126

IO Wrap Register Map
Bit Field
ACTIV_BIR_DIR_C
3-1
TRL_GPIO_73
0-0 reserved
2.16.389 Register 528h (offset = 528h) [reset = 1h]
7 6
reserved
R/W-0h
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
7-5 reserved
4-2 reserved
BUF_DIR_CTRL_G
1-0
PIO_74
2.16.390 Register 52Bh (offset = 52Bh) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
ACTIV_BIR_DIR_C
3-1
TRL_GPIO_74
0-0 reserved
1126
Serial Interface Register Maps
Table 2-2667. Register 527 Field Descriptions
Type Reset
R/W 0h
R/W 0h
Figure 2-2652. Register 528h
5 4
Table 2-2668. Register 528 Field Descriptions
Type Reset
R/W 0h
R/W 0h
R/W 1h
Figure 2-2653. Register 52Bh
5 4
Table 2-2669. Register 52B Field Descriptions
Type Reset
R/W 0h
R/W 0h
Copyright © 2020, Texas Instruments Incorporated
Description
Control to indicate whether the GPIO_73 needs dynamic
ouptu t enabling.
0 to 3 --> Static direction
4 --> Use the IO for 3 pin SPI B2 SDIO.
5 --> Use the IO for 4 pin SPI B2 SDO
6 --> Use the IO for 3 pin SPI B1 SDIO.
7 --> use the IO for 4 pin SPI B1 SDO.
3 2
reserved
R/W-0h
Description
Controls the direction of GPIO
0 both input and output are not selected.. can be used for
analog
1 input mode
2 output mode
3 shouldnt be used
3 2
ACTIV_BIR_DIR_CTRL_GPIO_74
R/W-0h
Description
Control to indicate whether the GPIO_74 needs dynamic
ouptu t enabling.
0 to 3 --> Static direction
4 --> Use the IO for 3 pin SPI B2 SDIO.
5 --> Use the IO for 4 pin SPI B2 SDO
6 --> Use the IO for 3 pin SPI B1 SDIO.
7 --> use the IO for 4 pin SPI B1 SDO.
www.ti.com
1 0
BUF_DIR_CTRL_GPIO_74
R/W-1h
1 0
reserved
R/W-0h
SBAU337 – May 2020
Submit Documentation Feedback