Texas Instruments AFE79 Series Programming & User Manual page 1039

www.ti.com
Bit Field
PULL_CTRL_GPIO
2-0
_47
2.16.143 Register 2BDh (offset = 2BDh) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
IBUF_ST_GPIO_4
1-0
7
2.16.144 Register 2BEh (offset = 2BEh) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
ODRIV_DS_GPIO_
1-0
47
2.16.145 Register 2C0h (offset = 2C0h) [reset = 1h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
PULL_CTRL_GPIO
2-0
_48
SBAU337 – May 2020
Submit Documentation Feedback
Table 2-2421. Register 2BC Field Descriptions
Type Reset
R/W 1h
Figure 2-2406. Register 2BDh
5 4
Table 2-2422. Register 2BD Field Descriptions
Type Reset
R/W 2h
Figure 2-2407. Register 2BEh
5 4
Table 2-2423. Register 2BE Field Descriptions
Type Reset
R/W 0h
Figure 2-2408. Register 2C0h
5 4
Table 2-2424. Register 2C0 Field Descriptions
Type Reset
R/W 1h
Copyright © 2020, Texas Instruments Incorporated
Description
Bit 0 indicates Pull up enable.
Bit <1> Indicates Pull value.
Bit <2> is unused.
3 2
Description
Input buffer signal strength
3 2
Description
output buffer drive strength.
3 2
PULL_CTRL_GPIO_48
Description
Bit 0 indicates Pull up enable.
Bit <1> Indicates Pull value.
Bit <2> is unused.
Serial Interface Register Maps
IO Wrap Register Map
1 0
IBUF_ST_GPIO_47
R/W-2h
1 0
ODRIV_DS_GPIO_47
R/W-0h
1 0
R/W-1h
1039