Texas Instruments AFE79 Series Programming & User Manual page 1168

IO Wrap Register Map
Bit Field
POL_INTPI_RXC_
0-0 AGC_PIN_FREEZ
E
2.16.512 Register 95Dh (offset = 95Dh) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
OVR_SEL_INTPI_
1-1 RXC_AGC_PIN_F
REEZE
OVR_INTPI_RXC_
0-0 AGC_PIN_FREEZ
E
2.16.513 Register 960h (offset = 960h) [reset = 0h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
Bit Field
SEL_INTPI_RXD_
2-1 AGC_PIN_FREEZ
E
POL_INTPI_RXD_
0-0 AGC_PIN_FREEZ
E
2.16.514 Register 961h (offset = 961h) [reset = 2h]
7 6
LEGEND: R/W = Read/Write; W = Write only; -n = value after reset
1168
Serial Interface Register Maps
Table 2-2790. Register 95C Field Descriptions (continued)
Type
R/W
Figure 2-2775. Register 95Dh
5 4
Table 2-2791. Register 95D Field Descriptions
Type
R/W
R/W
Figure 2-2776. Register 960h
5 4
Table 2-2792. Register 960 Field Descriptions
Type
R/W
R/W
Figure 2-2777. Register 961h
5 4
Copyright © 2020, Texas Instruments Incorporated
Reset Description
polarity control for intpi_rxc_agc_pin_freeze. 0 indicates pass
0h
through from GPIO when selected 1 indicates inverted signal
3
Reset Description
control to select whether the input function
1h intpi_rxc_agc_pin_freeze needs to be overriden ot not. 1
indicates override.
override value for ovr_sel_intpi_rxc_agc_pin_freeze is made
0h
high
3
SEL_INTPI_RXD_AGC_PIN_FR
Reset Description
select control for intpi_rxd_agc_pin_freeze. 0 indicates take
0h from parallel GPIO 1 indicates take from Serial LVDS GPIO 2
indicates take from Serdes GPIO
polarity control for intpi_rxd_agc_pin_freeze. 0 indicates pass
0h
through from GPIO when selected 1 indicates inverted signal
3
2 1
OVR_SEL_INT OVR_INTPI_R
PI_RXC_AGC_ XC_AGC_PIN_
PIN_FREEZE
R/W-1h
2 1
POL_INTPI_RX
EEZE D_AGC_PIN_F
R/W-0h
2 1
OVR_SEL_INT OVR_INTPI_R
PI_RXD_AGC_ XD_AGC_PIN_
PIN_FREEZE
R/W-1h
SBAU337 – May 2020
Submit Documentation Feedback
www.ti.com
0
FREEZE
R/W-0h
0
REEZE
R/W-0h
0
FREEZE
R/W-0h